Design and experiment of real-time reseeding system for transversal sugarcane planter with seeds pre-cutting

Yang Li; Shang Ping Li; Cheng Chen; Chuang Rui Zheng

doi:10.54254/2755-2721/65/20240454

Article Information

Received: 19 April 2024

Published: 23 May 2024

DOI: https://doi.org/10.54254/2755-2721/65/20240454

Article Type: Research Article

Cite this article

Li,Y.;Li,S.P.;Chen,C.;Zheng,C.R. (2024). Design and experiment of real-time reseeding system for transversal sugarcane planter with seeds pre-cutting. Applied and Computational Engineering,65,1-9.

Data availability

The datasets used and/or analyzed during the current study will be available from the authors upon reasonable request.

Disclaimer/Publisher's Note

The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of EWA Publishing and/or the editor(s). EWA Publishing and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

About this Volume

Volume Title: ACE Vol.65

Part of Series: Applied and Computational Engineering

ISSN: 2755-2721 (Print) / 2755-273X (Online)

Copyright & License

[1]Quan, R. (2016). Discussions on the Current Situation and Development Suggestions of Sugarcane Planters in China. Science and Technology Innovation Herald, 13(36), 83-84.

[2]Liu, Q., Mo, J., Li, T., et al. (2011). The Current Technology Status and Key Technical Problems of Sugarcane Planters in China. Sugarcane Industry,(5), 52-58.

[3]Besharati, B., Navid, H., Karimi, H., et al. (2019). Development of an Infrared Seed-Sensing System to Estimate Flow Rates Based on Physical Properties of Seeds. Computers and Electronics in Agriculture, 162, 874-881.

[4]Lei, X., Zou, H., Yang, Z., et al. (2022). Design and Experiment of Missing Seeding Detection and Seeding System in Potato Planter. Journal of China Agricultural University, 27(12), 234-244.

[5]Wang, M., Liu, Q., Ou, Y., et al. (2022). Numerical Simulation and Verification of Seed-Filling Performance of Single-Bud Billet Sugarcane Seed-Metering Device Based on EDEM. Agriculture, 12(7), 983.

[6]Wang, J., Tang, H., Wang, Q., et al. (2015). Numerical Simulation and Experimental Study on the Seeding Performance of Pinch-Type Precision Seeder Based on EDEM Software. Transactions of the Chinese Society of Agricultural Engineering, 31(21), 43-50.

[7]Wen, X., Yuan, H., Wang, G., et al. (2020). Research on the Calibration Method of Friction Coefficient of Granular Fertilizer in Discrete Element Simulation. Transactions of the Chinese Society for Agricultural Machinery, 51(2), 115-122+142.

[8]Liu, Q., Qu, Y., Qing, S., et al. (2006). Experimental Study on the Failure of Sugarcane Stems under Twisting, Compression, and Tensile Loads. Transactions of the Chinese Society of Agricultural Engineering,(6), 201-204.